These Genesis edge protection profiles are designed to absorb and protect against impact damage on external corners on walls. Suitable for tile-in, the profiles provide a decorative and clean finish as well as covering existing damage to walls so the wall covering doesn't have to be replaced.
Available in a bright stainless steel or a brushed stainless steel, these covers now look like part of the design rather than a protective element.
Available in bespoke powder coating to any RAL number on request.
Follow the guide below to install Genesis EAS Stainless Steel Retro-Fit-Corner Protectors
- Select EPS according to tile thickness.
- Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
- Press the perforated legs of the EPS into the tile adhesive and align, mechanical fix if required
- Trowel additional adhesive over the perforated legs to ensure full coverage.
- Solidly embed the tiles so that the tiled surface is flush with the top of the profile (the profile should not be higher than the tiled surface, but rather up to approx. 1 mm lower).
- Fill the joint completely with grout.
Delivery Options
Genesis EPS trims are delivered direct from the manufacturer. Because they comes in 2.5 metre lengths, there is an automatic £15.99 long length standard delivery charge. These trims are then despatched by the manufacturer on a 1 - 2 day service.
Please note Click & Collect is not available on these items as they are supplied direct from manufacturer.
