Dural Flexibal Self-Levelling Support Pedestals have been designed for the loose installation of porcelain or mineral patio tiles, decking boards, and finestone or concrete tiles with a thickness of 20mm or greater.
The four Dural Flexibal supports come in varying heights, and when joined with the PM20 extension or PB05 Compensating Plates can easily cover installation heights ranging from 25mm up to 185mm. They feature automatic incline compensation up to 5% and allow for thin 2mm joint widths.
The paving support pedestal height can be easily adjusted to the nearest milimetre using the integrated screw thread, even with high loads. The entire structure of the Dural Flexibal support is designed to provide loading capacity and stability up to 400kgs per support, with very high stability from the support plates.
Features & Benefits of Dural Flexibal Paving Support Pedestals
How to install Dural Flexibal Support Pedestals
Before you start to position the FLEXIBAL supports, the substrate must be prepared according to the respective circumstances and be have sufficient load-bearing capacity.
Suitable substrates include for example concrete, gravel/ chippings or wood. In the case of a gravel/chippings substrate, place 40 x 40 cm plates underneath the base elements of each support for additional stabilisation. In situations where surface water cannot seep directly into the ground, professional sealing along with sufficient incline should be provided. The sealing must be protected against damage by applying suitable means. Here we recommend the use of a drainage mat, for example DURABASE DD 80++.
Different sized tiles need support in different places in order to ensure structural integrity throughout your tiled surface. The image below shows you the optimum laying patterns and spacing for your tiles.
Start by positioning the support on a corner. Select a FLEXIBAL support of an appropriate height and align it using the height adjusting ring. Check for equal height using a level so that the finished flooring will be straight. Any incline or possible unevenness will be automatically compensated by the self-levelling head.
Place the plates on the supports and check for correct height alignment once again. Do the same for the entire surface.
On peripheries, cut the base elements on the markings as needed and break out the supports on the head to make sure that installation of the plates up to the edge is not affected.
Click the links below to see the technical specifications and user guides for this Dural Flexibal Support Pedestals.
Delivery Options
These items are delivered direct from the manufacturer and have an automatic £15.99 standard delivery charge. They are then despatched by the manufacturer on a 1-2 day service.
Please note Click & Collect is not available on these items as they are supplied direct from manufacturer.
