The Genesis EAQ Aluminium Quad tile trim is an extruded aluminium profile with a fully rounded quadrant face. It is designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.
This tile trim is available in a wide range of heights and finishes with corresponding Internal and External Aluminium corners avoiding the unsightly and exposed 45º cuts. These trims come in 2.5 metre long lengths and can be esily cut to size.
Where appropriate, trims are supplied with transparent protective film offering added protection during transport, storage and installation.
Available in bespoke powder coating to any RAL number on request.Follow the guide below to install the Genesis EAQ Aluminium Quad tile trim
- Select EAQ according to tile thickness
- Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
- Press the perimeter of the tiled covering.
- Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
- Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approx. 1mm lower.
- Fill the joint completely with grout.
Delivery Options
Genesis EAQ trims are delivered direct from the manufacturer. Because they comes in 2.5 metre lengths, there is an automatic £15.99 long length standard delivery charge. These trims are then despatched by the manufacturer on a 1 - 2 day service.
Please note Click & Collect is not available on these items as they are supplied direct from manufacturer.
