Leave your surfaces with a brilliant 'just washed' wet look that enhances and embellishes the appearance of your patio surface. This wet look surface colour intensifier makes colours bolder and deepens the hues and shading of your tiles. Simply apply using a sealer applicator, foam roller, or even a paint brush. The LTP Porcelain Tile Enhancer is suitable for use on all porcelain paving for dramatic long lasting effect.
The LTP Porcelain Tile Enhancer is a film-forming surface sealer and protector that is famously low maintenance. It is available in 1 litre and 5 litre bottles with approximately 30-40m² coverage per litre in one coat depending on substrate texture.
Features and Benefits of LTP Porcelain Tile Protector
Preparation:
Newly installed surfaces - ensure surface to be treated is completely clean, dry and free from cement and grout stain (see LTP Cement, Grout & Salt Remover). Existing surfaces - first clean and degrease surfaces with LTP Grimex Intensive Cleaner and rinse well. Leave to dry out thoroughly (24 hrs). Application: Clean and dry surface - apply using a foam roller, sealant applicator pad or paint brush. Pour contents into a separate container or dip tray. Apply to the surface without rubbing until an evenly thin film is created. Allow to dry (1 hr). For a more enhanced appearance further coats should be applied at right angles to the first (max.4).
Do not over apply as a heavy layer or too many coats may cause unsightly build up/affect slip resistance and/or reduce the efficiency of the product. Hardens after about an hour but will take a further three days to achieve full hardness and become fully resistant. Always test first to establish the correct method of application and optimum number of coats before general use.
Avoid extremes of temperature. Surface temperature range for application between 5ºC - 25ºC
Aftercare:
Routinely sweep surfaces. Mop regularly using LTP Porcelain Floor Tile Cleaner. At some stage, (every 2 – 3 years) complete renovation may be desired. In this case use LTP Solvex to strip the original coating before re-applying. Regular cleaning with steam cleaners, jet washers and strong detergents should be avoided.
Click the links below to see the technical specifications and user guides for this product.
