Mapei Latex Plus Adhesive Additive is a water dispersion of an extremely flexible polymer with low viscosity to be mixed with Keraquick S1 or Nivorapid in order to improve their deformability improving their application and performance characteristics. This admix turns these S1 tile adhesive into adhesives with improved S2 properties. Increased performance can be seen in faster setting times, higher slip resistance and improvement of deformability.
Where To Use Mapei Latex Plus Adhesive Additive:
- As an admixture for Keraquick S1 to obtain a high performance, fast setting, slip resistant and highly deformable adhesive (class C2FT S2 according to EN12004), for ceramic tiles and stone material.
- As an admixture for Nivorapid to obtain an ultra-fast cementitious levelling compound with improved deformability and bonding strength.
- Keraquick S1 or Nivorapid mixed with Latex Plus should never be applied at temperatures below +5°C or above +30°C.
- Do not use more than the recommended amount of Latex Plus.
- Do not add Latex Plus or water to a mix that has already begun to set.
- Do not leave Latex Plus, Nivorapid and Keraquick S1 exposed to direct sunlight for long periods of time before using.
A) Latex Plus + Keraquick S1 Fast-setting adhesive with high deformability and no vertical slip for interior and exterior installations of ceramic tiles and stone material.
B) Latex Plus + Nivorapid Fast setting levelling compound with high deformability for interior surfaces.
Surfaces to Prime: Plaster, Screeds/Renders, Concrete/Brick, Tile Backer Boards, Plaster Boards, Heated Cement Screeds, Flooring Grade Asphalt, and Cementitious Surfaces.
Primer/Admix Key Features: Rapid Drying, Improves adhesion and flexibility, Enhances Performance of Adhesives, Ideal for use with Porcelain Tiles
Primer/Admix Drying Time: 24 Hours
Click the links below to see the technical specifications and user guides for this product.
