Mapei Ultracolor Plus is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The new range of colours of Ultracolour Plus grouts brings out the beauty of any tiled surface and add a touch of originality to any setting. Designed to last and to keep surfaces hygienic and healthy, Ultracolor Plus is easy to apply and clean.
This high-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar is free from Portland cement. It features water-repellent DropEffect® and mould-resistant BioBlock® technology, with very low emission of volatile organic compounds and offset Greenhouse Gas Emissions
Available in both 2kg and 5kg bags from London Tile.
Features & Benefits of Mapei Ultracolour Plus Tile Grout
Application Procedure:
Preparing the joints: Grouting may take place when the adhesive is completely set. Make sure that the waiting times indicated in the technical data sheets are followed. The joints must be clean, free of dust and empty down to at least 2/3 of the thickness of the tiles. Any adhesive or mortar which has seeped into the joints while laying the tiles must be removed while still fresh. With very absorbent tiles, high temperatures or windy conditions, dampen the joints with clean water.
Preparing the mix: While stirring, pour the Mapei Ultracolor Plus Grout powder into a clean, rust-free container containing 21-23% by weight of clean water. Mix the grout with a low-speed mixer to avoid air entrainment, until a smooth paste is obtained. Let the mix stand for 2-3 minutes, and stir again briefly before use. Use the mix within 20-25 minutes of its preparation.
Applying the grout: Fill the joints with the Mapei Ultracolor Plus mix using a special MAPEI grout float or rubber squeegee, without leaving any gaps or steps. Remove any excess of Mapei Ultracolor Plus from the surface, by moving the float diagonally to the joints while the mix is still fresh.
Finishing: When the mix loses its plasticity and becomes opaque, which usually takes place after 15-30 minutes, clean off the excess Ultracolor Plus with a hard, damp sponge (e.g. a MAPEI sponge), working in a diagonal direction to the joints. Rinse the sponge frequently, using two different containers of water: one to remove the excess mix from the sponge, and the other, containing clean water, to rinse the sponge. This operation may also be carried out with a machine with a sponge belt or rotating disc. When the mix is partially set, after 50-60 minutes, a damp Scotch-Brite® sponge or an abrasive felt disc may be passed over the joints to even out the surface.
If the cleaning operation is carried out too soon (the mix is still too wet), some of the mix may be removed from the joints. If grouting is carried out in extremely hot, dry or windy weather, we recommend that the joints filled with Mapei Ultracolor Plus are dampened after a few hours.
Damp curing of Mapei Ultracolor Plus improves its final characteristics in all cases. Final cleaning of the powdery film of Mapei Ultracolor Plus from the surface may be carried out with a clean, dry cloth.
After the final cleaning operation, if the surface still has traces of Mapei Ultracolor Plus due to incorrect application, it may be cleaned down with an acidic cleaner, by following the relevant instructions, at least 24 hours after grouting the joints.
Click the links below to see the technical specifications and user guides for this product.
