Looking for robust edge protection for your tiled walls? Discover the Schluter Quadec E Stainless Steel Tile Trim, the perfect solution for durable and stylish corner protection.
Key Features of Schluter Quadec E Stainless Steel Tile Trim
- Edge Protection: Shields external corners of tiled walls from mechanical damage.
- Versatile Use: Ideal for floor edges, stair nosings, and transitions with carpet, parquet, natural stone, or epoxy resin.
- Material: Made from high-quality V2A stainless steel (1.4301), perfect for environments needing chemical and acid resistance, such as kitchens, hospitals, and industrial settings.
- Sizes Available: Comes in 6mm, 8mm, 10mm, and 12.5mm heights, all in convenient 2.5m lengths.
Why Choose Schluter Quadec E Stainless Steel Tile Trim?
- Durability: Offers long-lasting protection, especially in high-impact areas.
- Aesthetic Appeal: Enhances the look of your tiled corners with a sleek stainless steel finish.
- Hygienic: Suitable for food industry facilities, breweries, dairies, and other areas requiring high hygiene standards.
- Easy Maintenance: Requires minimal upkeep; just clean periodically with mild household cleaners free from hydrochloric and hydrofluoric acid.
Enhance your tiled spaces with the reliability and elegance of Schluter Quadec E Stainless Steel Tile Trim. Whether in residential or industrial settings, this tile trim offers superior protection and a refined finish.
- Select the profile height according to the tile thickness and the installation method.
- Apply tile adhesive to the area where the tile covering will end, using a notched trowel.
- Press the trapezoid-perforated anchoring leg of the profile firmly into the adhesive and align it.
- Trowel additional tile adhesive over the trapezoid perforated anchoring leg to ensure full coverage.
- Fully embed the adjoining tiles and adjust them in such a way that the upper lip of the profile is flush with the tile. Note: The profile should not be higher than the tiled surface, but rather up to approx. 1 mm lower.
- The tile is set to the lateral joint spacer, which creates an evenly spaced joint of 1.5 mm. In the case of profiles without joint spacer, a joint of approx. 1.5 mm is recommended.
- Completely fill the space between the tile and the profile with grout.
