Schlüter Quadec MC is a luxury high quality tile trim finishing profile that offers excellent edge protection for external corners of tiled walls. Made from solid brass, it is then chrome plated for an exceptional high quality shine. Schlüter-QUADEC-MC is a high-quality chrome plated brass finishing profile for external corners and edges of tiled walls. The visible area of the profile forms a right angled external corner.
Schlüter Quadec is a finishing profile that offers excellent edge protection for External corners of Tiled Walls. The integrated joint Spacer of the brass tile trim defines a joint chamber with the tile. This trim is available in a range of depths from 6mm up to 15mm all at a 2.5m length.
Unmatched Durability:Crafted from solid brass before being plated in chrome, the Schluter Quadec MC features a unique design that distributes point loads, safeguarding your surfaces from wear and tear. The striking chrome finish adds a touch of elegance to any space.
Customizable Fit:- Length: 2.5 meters to cover extensive areas.
- Thickness: Available in a range from 6mm to 15mm, ensuring the perfect fit for your project.
Choose the Schluter Quadec MC for a professional finish and long-lasting protection that combines functionality with aesthetic appeal. Transform your home or commercial space with confidence and style using our premium brass tile trim.
Optimize your interior with the best in class chrome plated brass tile trim—the Schluter Quadec MC.
- Select the profile height according to the tile thickness and the installation method.
- Apply tile adhesive to the area where the tile covering will end, using a notched trowel.
- Press the trapezoid-perforated anchoring leg of the profile firmly into the adhesive and align it.
- Trowel additional tile adhesive over the trapezoid perforated anchoring leg to ensure full coverage.
- Fully embed the adjoining tiles and adjust them in such a way that the upper lip of the profile is flush with the tile. Note: The profile should not be higher than the tiled surface, but rather up to approx. 1 mm lower.
- The tile is set to the lateral joint spacer, which creates an evenly spaced joint of 1.5 mm. In the case of profiles without joint spacer, a joint of approx. 1.5 mm is recommended.
- Completely fill the space between the tile and the profile with grout.
