Genesis EAA edge protection profiles are designed to absorb and protect against impact damage on external corners on walls.
Not only are they suitable for retro fixing after a project is completed, the profiles also provide a decorative and clean finish. You can use them to cover existing damage to walls so the wall covering doesn't have to be replaced.
Genesis EAA Aluminium Retro-Fit Corner Protectors are available in 20mm & 25mm variants in a range of commonly used colours.
Available in bespoke powder coating to any RAL number on request.
Follow the guide below to install Genesis EAA Aluminium Retro-Fit-Corner Protectors
- Ensure that the surface where the EAA profile is being applied is smooth, dry and free from any contaminants such as loose paint, dust and grease.
- Apply a bead of proprietary cartridge adhesive to the back of both wings on the inside of the profile.
- Carefully place the EAA profile into position and apply an even pressure over the entire surface of the profile until a satisfactory lie is achieved.
- Once the adhesive has set, remove the protective film from the surface of the profile.
Delivery Options
Genesis EAA trims are delivered direct from the manufacturer. Because they comes in 2.5 metre lengths, there is an automatic £15.99 long length standard delivery charge. These trims are then despatched by the manufacturer on a 1 - 2 day service.
Please note Click & Collect is not available on these items as they are supplied direct from manufacturer.
