Genesis EMA Aluminium Medium Duty Trims are an L shaped extruded aluminium profile designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations. The medium duty profile is thinner than the ESA profile therefore but still offers a good degree of protection. In choosing aluminium as a finishing profile the suitability of its installation must be determined if chemical or mechanical stresses are anticipated.
Available in bespoke powder coating to any RAL number on request.Follow the guide below to install the Genesis EMA Aluminium Medium Duty Tile Trim
- Select EMA according to tile thickness.
- Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
- Press the perforated anchoring leg of the EMA into the tile adhesive and align, mechanical fix if required.
- Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
- Solidly embed the tiles so that the tiled surface is flush with the top of the profile.
- The profile should not be higher than the tiled surface, but rather up to approx. 1mm lower.
- Fill the joint completely with grout.
Delivery Options
Genesis EMA trims are delivered direct from the manufacturer. Because they comes in 2.5 metre lengths, there is an automatic £15.99 long length standard delivery charge. These trims are then despatched by the manufacturer on a 1 - 2 day service.
Please note Click & Collect is not available on these items as they are supplied direct from manufacturer.
